Doherty 1.8 – 2.2 GHz

Designed for the main FR1 telecom bands, this power amplifier stands out for its high efficiency over a large bandwidth.

Power Amplifier Key Features

  • GaN on SiC Doherty PA
  • Frequency range: 1.8 GHz – 2.2 GHz
  • Efficiency: >46 % at 8 dB Output Back Off (OBO)
  • Output power at P3dB = 47.5 dBm
  • Power gain: 18 dB
  • Board size: 80 x 60 mm

Typical Applications

  • 3GPP 5G NR FR1 bands n1, n2, n3, n25, n30, n34 and n39
  • 3GPP 4G LTE bands 1, 2, 3, 25, 34 and 39
  • FDD and TDD systems
  • Microcell Base Station
  • Repeaters
  • Small cells for wireless communications infrastructure
  • Active antennas
  • Land Mobile and Military Radio Communications
  • General purpose wireless applications
  • MMIC : Massive MIMO applications

PA Performances at Pout (avg) = 39.5 dBm

Test signal: LTE20, 5 Channels of 100 MHz, FDD (8 dB PAPR), PA spectrum at 2GHz

Test Signal

LTE20 5C 100MHz Frequency Division Duplex 8dB PAPR), Center Frequency = 2GHz PA Performances at Average Power = 39.5dBm and PA spectrum at 2GHz

Find the reference that is right for you

Contact us

Phone Number +33 05 55 42 62 44

Email Address  contact@wupatec.com

Address Head Office: 20 rue Atlantis, 87068, Limoges, France

Retour en haut